(Stieglitz) Splinter Forceps 5-1/2" (14.0 cm) Williams (Stiegliz) Splinter Forceps are handcrafted from surgical grade German stainless steel. Designed with pointed, serrated tips and broad grasping surfaces, these forceps are available with straight, 45 degree angle, or 90 degree angled tips. The ratcheting finger rings assure a secure and steady grip on what is being removed.
beaver-type, round knurled handle, for mini blades 3K Round Knife Handle is a beaver-type that is intended to be used for microsurgical procedures to make smaller incisions. This knife handle is associated with the mini blade series 50, 60, and 70 and consists of a round, knurled gripping surface to contribute to a better hold and minimize the chance of…
Abdominal Detachable Retractor set includes: 1 pair of 2-1/2" (6.4 cm) wire lateral snap-on blades, 1 pair of 3-1/2" (8.8 cm) wire lateral snap-on blades & one (1) center blade Balfour Abdominal Detachable Retractor is a system that includes one pair of 2 ?" wire lateral snap-on blades, one pair of 3 ?" wire lateral snap-on blades, and one center…
Abdominal Retractor standard pattern O'Sullivan-O'Connor Abdominal Retractor is a standard pattern that is available in a variety of choices. For example, the complete set includes the retractor frame with a variety of different blades and wingnuts, which may also each be purchased separately. Generally, this self-retaining retractor is utilized when a midline incision needs to be held open, but may…
Deep blades, two (2) each blades 1-3/4" x 4-1/4" (4.5 cm x 10.6 cm), w/ wingnuts O'Sullivan-O'Connor Abdominal Retractor is available in complete sets that include deep blades that are either 3" or 4" in depth. The rest of the blades that are included are various sizes and shapes to account for the special needs of the operation. This retractor…
w/ fixed fenestrated side blades, 2-1/2" deep & center blade #2470-72 (3" x 2") Balfour Abdominal Retractor with Fixed Side Blades incorporates 2 ?" deep fenestrated side blades that are attached onto the center blade, which is 3" wide x 2" deep. Two different sizes of this retractor are offered according to the maximum spread they provide. The side blades…
9x10 teeth, 6" (15.0 cm) Adair-Allis Tissue Forceps are 6" long and are primarily used in general procedures in instances such as when diseased tissue needs to be held. The 9x10 teeth on the tips of the jaws provide a sure grasp of the tissue being held, and can also be used to approximate the edges of the membrane that…
Adlerkreutz Tissue Forceps 4x5 teeth Adlerkreutz Tissue Forceps are handcrafted from surgical grade German stainless steel. Designed with 4x5 teeth for a secure grip on tissues. The design allows precise dissection and tissue handling while the teeth assure a secure grasp. Available in a 6" or 8" model.
Narrow jaws, 2x3 teeth Adlerkreutz Tissue Forceps are handcrafted from surgical grade German stainless steel. Designed with narrow jaws and 2x3 teeth for a secure grip on tissues. The slim design allows for delicate and precise dissection and tissue handling while the wider grip assures a comfortable grip for the surgeon.
Adson Artery Forceps Adson Artery Forceps can be used as a hemostat for general surgeries to regulate bleeding of broken arteries in the course of an operation. These forceps are developed with ring-handles and a locking ratchet to ensure a firm grasp on the artery. They are also offered in a delicate or standard pattern with the choice of curved…
Delicate pattern, 1x2 teeth, 7-1/8" (18.0 cm) Adson Artery Forceps are 7 1/8" and are developed with 1x2 teeth in a delicate pattern with either curved or straight jaws to suit different needs. Primarily applied during operations in which arteries need to be grasped or compressed, the teeth on the tips of the jaws interlock to confirm that a tight…
7-1/2" (19.0 cm) Adson Bayonet Dressing Forceps are handcrafted from surgical grade German stainless steel. Designed with its bayonet handle angled and 90 degrees from the grasping direction, these dressing forceps offer a leverage not seen with standard models. The serrated handle assures a firm grip on this instrument.
Adson Bipolar Forceps 1.0 mm tip, smooth jaw, 4-3/4" (12.0 cm) Adson Bipolar Forceps are designed to minimize heat and current while coagulating. For use during bipolar electrosurgical procedures, these forceps are designed with a 1.0 mm tip and a smooth jaw. Available in both insulated and insulated with irrigation. Just as with their standard counterparts, these forceps are the…
Adson Suction Tube w/ finger cut-off, curved Adson Suction Tube contains a finger cut-off valve to place rest the finger on and a grip handle for a better hold. This instrument is available in several different French measurements on a 5" or 8" working length. The intended purpose of this suction tube with a slightly curved tip is to remove…
Adson Suture Forceps w/ tying platform, 2.0 mm tips, 4-3/4" (12.1 cm), smooth platform Adson Suture Forceps with Tying Platform are handcrafted from surgical grade German stainless steel. These forceps are designed with 2.0 mm tips and a tying platform. Available with a smooth platform to securely hold a suture or with 1x2 teeth and a smooth platform for extra…
Adson Thumb Forceps standard pattern. Adson Thumb Forceps are handcrafted from surgical grade German stainless steel. Available in a variety of forms: for dressings with a serrated platform or for tissue with a serrated platform and 1x2 teeth. These forceps are also known as pickups, and are by far the most common style of thumb forceps. Each style is also…
Adson Thumb Forceps - Angled Tips angled tips, 4-3/4" (12.1 cm) Adson Thumb Forceps are handcrafted from surgical grade German stainless steel with angled tips. Available in a variety of forms: for dressings with a serrated platform or for tissue with a serrated platform and 1x2 teeth or 1x2 teeth with cross-serrated tips.
Adson Thumb Forceps - Cross-Serrated Tips cross-serrated tips, 4-3/4" (12.1 cm) Adson Thumb Forceps are handcrafted from surgical grade German stainless steel with cross-serrated tips for additional grip. Available in a variety of forms: for dressings with a serrated platform or for tissue with a serrated platform and 1x2 teeth.
Fenestrated handles, lightweight, 4-3/4" (12.1 cm) Adson Thumb Forceps with Fenestrated Handles are handcrafted from surgical grade German stainless steel. Available in a variety of forms: for dressings with a serrated platform or for tissue with a serrated platform and 1x2 teeth. This lightweight model is ideal for plastic surgery procedures or any other procedure where surgeon fatigue may pose…
Tungsten Carbide Adson Thumb Forceps are handcrafted from tungsten carbide for a durable and strong instrument. Available in a variety of forms: for dressings with a serrated platform or for tissue with a serrated platform and 1x2 teeth. Each style is also available in a delicate pattern and at several different lengths for a comfortable grip. Tungsten carbide forceps feature…